It appears that your cart is currently empty
It appears that your cart is currently empty
No home water purification system is complete without a dedicated sediment filter. TheFlow-Pro Sediment Filter 9.75" x 2.5" - Watts is created from 100% melt-blown propylene. This filter is specifically designed to remove all suspended solids from the main entry points of your water supply. The thick-walled melt-blown outer layer is used to capture larger-sized particles of sediment on the surface. Finer particles are then filtered down to the 1 micron rated inner core, which is dense enough to trap even the tiniest grains of silt, rust, sand, and other forms of solid matter.
The Flow-Pro Sediment Filter 9.75" x 2.5" - Watts offers high chemical resistance and excellent dirt-holding capacity. So durability and consistently high performance can be expected even under heavy water flow. The Flow Pro 10” Water Filter is ideally suited for pre-filtration in reverse osmosis systems, fine chemicals, electronics, plating solutions, and potable water. As the water filter is produced with only food-grade materials, it can be conveniently used for all food service purposes.
This cartridge can also be managed in conjunction with activated granular carbon filters in the post-filtration process. If you do not have a GAC filter in place, then do not use the Flow-Pro to filter microbiologically unsafe water unless adequate disinfection has been provided out beforehand.
Depending on water quality and usage we recommend that you change the Flow-Pro filter on a 6-month basis to ensure optimum performance.
| Length | 9.75 inch |
| Width | 2.50 inch |
| Filter Application | Sediment/Dirt/Rust |
| Media | Dual-gradient density spun polypropylene |
| Materials | Polypropylene, Carbon |
| Micron Rating | 1, 5, 10, 20 or 50 |
| Flow Rate | 2-8 GPM |
| Min Temperature | 40 F |
| Max Temperature | 140 F |
| Filter Life | 6 - 12 Months |